Store

Introducing the new Ai AccuTemp 1.9 cubic foot vacuum ovens (110V only), come standard with stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, 5 sided pad heating technology and two year warranty. The thermal-conductive aluminum pan shelves provide excellent temperature uniformity inside the chamber, while standard is the 3rd gen LCD low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C.

AccuTemp-19 series digital desktop vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.

Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.

Attention: Before initial use, run oven at 400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.

Features

• All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.

• New secondary over-temp protection (110V models only)

• Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.

• All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability.

• New 5 sided pad heating technology and aluminum shelves provide excellent temperature uniformity and faster heating rates (25% faster in our lab test).

• Adjustable gas back fill capability with needle valve and vent port.

• 3rd gen LCD low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C

• Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.

• Dual layer observation window with 1/2" tempered safety glass.

• 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature.

• Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.

• Built-in inch mercury vacuum gauge and circuit breaker.

• Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.

• All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with two year warranty and lifetime US-based parts and service support.

• Guaranteed US based phone and email assistance within 30 minutes from our engineers.

Manufactured in accordance with

• ISO 9001:2000

• ISO 12100-1:2003, ISO 12100-2:2003

• EN1050:1996, EN294:1992, EN60204-1:2006

• CE

Introducing the new 5-shelf Ai AccuTemp 7.5 cubic foot vacuum ovens (110V only), come standard with stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, and two year warranty. With our internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption.

Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.

Features

• All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.

• Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.

• All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability.

• Five aluminum heating shelves with individual in-shelf temperature sensor, heater and digital temperature controller.

• 3rd gen low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C.

• Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.

• Dual layer observation window with 3/4" tempered safety glass.

• 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature.

• Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.

• A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried.

• Built-in check valve prevents vacuum oil back flow. 

• Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.

• Built-in station-able swivel casters with locks for ultra-portability.

• For improved temperature tracking, run the auto-tune procedure as outlined in the manual.

• All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with two year warranty and lifetime US-based parts and service support.

• Guaranteed US based phone and email assistance within 30 minutes from our engineers.

Manufactured in accordance with

• ISO 9001:2000

• ISO 12100-1:2003, ISO 12100-2:2003

• EN1050:1996, EN294:1992, EN60204-1:2006

• CE

The E23 ELITE series digital vacuum ovens feature our 5-side chamber jacket heating system that covers left, right, up, down and backside of the chamber; all metal internal vacuum tubing (compare to rubber hose) for better vacuum levels and durability; and build-in secondary over-temp dial for enhanced over temperature protection. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.

Every one of our vacuum ovens goes through a 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.

Attention: Before initial use, run oven at 400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.

Features

• Re-designed 5-side jacket heating system covers left, right, up, down and backside of the oven, it provides perfect temperature uniformity and fast heating rates. 

• All metal internal vacuum tubing and compression fittings that holds vacuum 10 times longer and deeper than with rubber tubing. They also provide you the most sanitary working environment, while last for decades without maintenance.

• Built-in secondary over-temp dial for added protection.

• Exceptional build and finish quality.

• Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.

• Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.

• Adjustable gas back fill function via vent port

• Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.

• All ovens shipped from our New Jersey or Nevada location for quick delivery.

• Guarantee US based phone and email assistance within 30 minutes from our engineers.

• 2-year warranty and lifetime US-based parts and service support.