SORT BY
$990.00
$990.00
A set of 13mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 13mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250°C.
Specifications
Maximum Pressure: 20 tons
Maximum Temperature: 250°C
Rockwell Hardness: Rc 62
Diameter (ID): 13 mm
Sleeve Diameter (OD): 92 mm
Sleeve Height: 40 mm
Total Height: 75 (assembled without sample)
Thermal Plate Diameter: 105 mm
Max. Load Height: 14 mm
Temperature Step: 1°C
Input: 110v 60Hz
Power: 215 watts
Temperature Sampling: 3 times per second
Accuracy: +/- 1%
Working Environment: 0-50°C, <35% rh="">35%>
Material:Pressing Die Tolerance: 0.01-0.02 mm (10-20 micron)
Die set includes
Two 13mm ID cylinder-shape core dies made of highly polished hardened steel
One steel sleeve with PT-100 heater and sensor
One steel support plate
One thermal isolation plate
One push rod
One cylinder pellet ejector
One WK-1 digital temperature controller
Important
Always wear protection goggles during operation
Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
Never apply pressure beyond 20 tons
$1290.00
$1290.00
A set of 25mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 25mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250°C.
Specifications
Maximum Pressure: 70 tons
Maximum Temperature: 250°C
Rockwell Hardness: Rc 62
Diameter (ID): 25 mm
Sleeve Diameter (OD): 92 mm
Sleeve Height: 45 mm
Total Height: 105 (assembled without sample)
Thermal Plate Diameter: 105 mm
Max. Load Height: 25 mm
Temperature Step: 1°C
Input: 110v 60Hz
Power: 270 watts
Temperature Sampling: 3 times per second
Accuracy: +/- 1%
Working Environment: 0-50°C, <35% rh="">35%>
Material:Pressing Die Tolerance: 0.01-0.02 mm (10-20 micron)
Die set includes
Two 25mm ID cylinder-shape core dies made of highly polished hardened steel
One steel sleeve with PT-100 heater and sensor
One steel support plate
One thermal isolation plate
One push rod
One cylinder pellet ejector
One WK-1 digital temperature controller
Important
Always wear protection goggles during operation
Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
Never apply pressure beyond 70 tons
$1690.00
$1690.00
A set of 50mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 50mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250°C.
Specifications
Maximum Pressure: 200 tons
Maximum Temperature: 250°C
Rockwell Hardness: Rc 62
Diameter (ID): 50 mm
Sleeve Diameter (OD): 130 mm
Total Height: 120 (assembled without sample)
Max. Load Height: 28 mm
Temperature Step: 1°C
Input: 110v 60Hz
Power: 550 watts
Temperature Sampling: 3 times per second
Accuracy: +/- 1%
Working Environment: 0-50°C, <35% rh="">35%>
Material: Cr12 hardened carbon mold steel
Pressing Die Tolerance: 0.01-0.02 mm (10-20 micron)
Die set includes
Two 50mm ID cylinder-shape core dies made of highly polished hardened steel
One steel sleeve with PT-100 heater and sensor
One steel support plate
One thermal isolation plate
One push rod
One cylinder pellet ejector
One WK-1 digital temperature controller
Important
Always wear protection goggles during operation
Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
Never apply pressure beyond 200 tons
$1990.00
$1990.00
A set of 76mm diameter (ID) hardened steel dry pressing die set for pellet presses, ready for you to make 76mm diameter cylinder-shape pellets. Heating system with programmable digital temperature controller allows heating up to 250°C.
Specifications
Maximum Pressure: 300 tons
Maximum Temperature: 250°C
Rockwell Hardness: Rc 62
Diameter (ID): 76 mm
Sleeve Diameter (OD): 160 mm
Total Height: 135 (assembled without sample)
Max. Load Height: 30 mm
Temperature Step: 1°C
Input: 110v 60Hz
Power: 800 watts
Temperature Sampling: 3 times per second
Accuracy: +/- 1%
Working Environment: 0-50°C, <35% rh="">35%>
Material: Cr12 hardened carbon mold steel
Pressing Die Tolerance: 0.01-0.02 mm (10-20 micron)
Die set includes
One 76mm ID cylinder-shape core dies made of highly polished hardened steel
One steel sleeve with PT-100 heater and sensor
One steel support plate
One thermal isolation plate
One push rod
One cylinder pellet ejector
One WK-1 digital temperature controller
Important
Always wear protection goggles during operation
Clean the die set throughout with absolute ethyl alcohol and keep them in a dry box with silica gel after use to avoid rusting on the surface.
Never apply pressure beyond 300 tons